Ordering Info and Specifications
|Top Previous Next|
Device numbering scheme is as follows:
DS101x devices without "G", "C", or "GC" options are not being offered by Tibbo. If you want to purchase Ethernet-only device (without any wireless options), then order DS100x instead.
DS1010, DS1012, and DS1013 devices can be ordered with Wi-Fi, GPRS, or Wi-Fi and GPRS options. The Wi-Fi interface works better when equipped with an antenna. In the absence of Wi-Fi antenna, the Wi-Fi interface still works (relying on a small "chip" antenna on the GA1000), but the operating range is reduced. The GPRS interface can't work without the antenna at all. Therefore:
•DS1010G, DS1012G, and DS1013G devices (with Wi-Fi option) will be shipped with Wi-Fi antenna.
•DS1010C, DS1012C, and DS1013C devices (with GPRS option) will be shipped with GPRS antenna.
•DS1010GC, DS1012GC, and DS1013GC devices (with Wi-Fi and GPRS options) will be shipped with GPRS antenna. The Wi-Fi interface will rely on the internal "chip" antenna and, therefore, will have reduced range compared to DS1010G, DS1013G, and DS1013G devices.
All specifications are subject to change without notice and are for reference only. Tibbo assumes no responsibility for any errors in this Manual, and does not make any commitment to update the information contained herein.
Think the above table should contain additional data? Do not just assume that you know the answer — talk to Tibbo! Remember that the ultimate responsibility for all decisions you make regarding the use and the mode of use of Tibbo products lies with you, our Customer.