Available Tibbits

Top  Previous  Next

#00-1, M1S: Four Direct I/O lines

#00-2, M1S: Three direct I/O lines and ground

#00-3, M1S: Two direct I/O lines, +5V power, ground

#01, M1S: Four-line RS232 port [SER, INT]

#02, M2S: RS232/422/485 port [SER, INT]

#03-1, M1S: Two low-power relays (configuration 1)

#03-2, M1S: Two low-power relays (configuration 2)

#04-1, M1S: Two isolated inputs

#04-2, M1S: Three isolated inputs, common (-)

#04-3, M1S: Three isolated inputs, common (+)

#04-4, M1S: Four opto-inputs, common ground

#04-5, M1S: Two 24V isolated inputs

#04-6, M1S: Three 24V isolated inputs, common (-)

#04-7, M1S: Three 24V isolated inputs, common (+)

#04-8, M1S: Four 24V opto-inputs, common ground

#05, M1S: RS485 port

#06, M2T: Two high-power relays

#07, M1S: Two solid state relays

#08, M1S: Wiegand and clock/data reader port [INT]

#09, M1S: Low-power 5V supply, 12V input

#10, M1T: Medium-power 5V supply, 12V input

#11, M1S: Four open collector outputs

#12, M1S: Low-power +15/-15V power supply

#13, M1S: Four-channel ADC

#14, M1S: Four-channel DAC

#15, H1S: High-voltage AC solid state relay

#16, M1S: Three PWMs with OC outputs

#17, M1S: Three PWMs with power outputs

#18, C1: Power input

#19, C2: DB9 connector

#20, C2: Nine terminal blocks

#21, C1: Four terminal blocks

#22, M1S: RTD temperature meter

#23, M2T: Isolated PoE [POE] (can be used as generic isolated power supply with 48V input)

#25, M2T: High-power 5V supply, 24V/48V input

#26, M1S: IR command processor

#27, C1: IR receiver/transmitter

#28, C1: Ambient light sensor

#29, C1: Ambient temperature meter

#30, C1: Ambient humidity/temperature meter

#31, M1S: PIC coprocessor

#35, C1:Barometric pressure sensor

#36, C1: 3-axis accelerometer

#37, C1: RF connector

#38, C1: Pushbutton

#39-1~4, C1: Large LED (four colors)

#40-1~4, M1S: Digital potentiometer (four nominals)

#41, C1: 8-bit port

#42, M1S: RTC and NVRAM with backup

#47, H2: GPRS modem

#48, H2: Audio in/out [AUD]

#49, C2: Micro SD card slot [MMC]

#50, C1: Mini Type B USB port [USB]

#51, M1S: CAN bus [CAN]

#52, M2T: Four-channel isolated +/-10V ADC

#53, M2T: Isolated 4-20mA ADC

#54, M1S: Four dry contact inputs

#56, C1: Type A USB port [USB]

#57, M1S: FPGA Tibbit

#58, M1S: Two 24V NPN isolated open collector outputs

#59, M1S: Two 24V PNP isolated open collector outputs